40V MAX XGT BRUSHLESS 1/2 IN. The Makita 40V MAX XGT Brushless 1/2 in. Hammer Driver-Drill Takes on Demanding Drilling and Driving. The Makita GPH01D 40V Max XGT Brushless 1/2 in.
Hammer Driver-Drill is a ground-breaking tool that can handle the most demanding drilling and driving applications in wood, masonry, and metal. In hammer-drill mode, the tool applies a percussive motion for drilling holes in concrete or masonry.
Powered by a Makita-built brushless motor, the GPH01D delivers 1,240 in-lbs of max torque, outpowering the competition in heavy-load applications. This XGT Hammer Driver-Drill has 35% faster drilling speeds compared to the 18V LXT version with its two speed settings (0-650 and 0-2600 RPM and 0-9,750 and 0-39,000 BPM).
The smooth variable speed trigger gives optimum control. The electronic digital clutch accurately targets your desired torque range with 41 settings on low and 21 settings on high speed.
Active Feedback-Sensing Technology, or AFT, turns off the motor if the accessory rotation is suddenly forced to stop. The Makita XGT GPH01D features Makita Extreme Protection Technology for your cordless impact driver.Engineered for improved operation in harsh conditions, a protective seal is added inside the tool to repel water and dust away from key internal components. This hammer drill-driver also includes a reinforced gear housing and an all-metal chuck for additional durability.
The XGT system of tools utilizes 40V max lithium-ion batteries. This system allows users to completely transition into a cordless jobsite because XGT is engineered to deliver high power and take on demanding applications. Equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability, XGT cordless tools are designed to outpower, outsmart, and outlast the rest. This Makita 40V max XGT Brushless 1/2 in. Hammer Driver-Drill features a brushless motor that delivers 1,250 in-lbs of max torque.
The 2 speed settings offer speeds up to 2,600 RPM and 39,000 BPM for up to 35% faster speeds. The Makita GPH01D XGT Impact Driver has an electronic digital clutch that offers 41 settings in low speed and 21 in high speed to accurately target desired torque range.
The Makita XGT 40V Max battery delivers high power to take on high-demand applications, allowing users to completely transition to a cordless jobsite. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart, and outlast the rest. OUTPOWER: Makita-built brushless motor delivers 1,250 in. Of Max Torque; out powers similar models in heavy-load applications.
OUTSMART: Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed). OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh job site conditions. Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop. Up to 35% faster drilling speed with 2 speed settings (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM).
Compact length at only 7-1/8; ideal for working in tight spaces. Ultra-smooth variable speed trigger provides optimum control. Reinforced gear housing engineered for maximum job site durability. All-metal chuck for increased job site durability. Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry.
The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications. The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating. XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications.
The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging. Number of Batteries Required: 1. Number of Batteries Included: 2. Battery Ampere-hour (Ah): 2.5.Drill / Driver Maximum RPM: 2600. 2x Makita BL4025 40V Max XGT 2.5Ah Battery. 1x Makita DC40RA 40V Max XGT Rapid Optimum Charger. 1x Makita GPH01Z 40V Max XGT Brushless 1/2 Hammer Driver-Drill. ALL products listed are under the authorization & permission of the manufacturers who make them. We do not break up combo kits to sell the component. BRAND NEW unless they are clearly marked as "reconditioned". Come in their original packaging (NIB). Tools Plus has been in business for 40+ years and we are dedicated to providing you the highest level of quality service. If you would like us to call you, please send your question along with your name, contact number and the best time to reach you. (Please note: feedback is left once received).
An important note regarding Heavy or Bulky items. Destinations "might" necessitate the need for a Lift gate or other additional expenses. These additional expenses are extra cost and you will be contacted for your approval of these extra expenses.You can always ask questions in advance using the Ask a Question feature on this page. Your product's safety and Your Satisfaction is our priority! Images in our listing are indicative of the product and may vary slightly. Accessories are NOT included unless specified in the listing.
We don't build anything. So please don't hold against us: color variations nor changes in the products country of origin. Tools Plus sells through numerous outlets, therefore, items may become unavailable unexpectedly.Tools Plus is committed to providing a great customer experience with an easy return process. When you put in a return request, Tools Plus will provide you with a Return Merchandise Authorization. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Cordless Drills".
The seller is "tools-plus-outlet" and is located in this country: US. This item can be shipped to United States.